MAGNETOSTRICTIVE SENSOR

It is a high-precision, easy-to-install technology for stationary tanks that allows you to control fuel purchases and inventory. The Magnetostrictive wired sensor can be connected to its native database software “CONTROL IMS”, to measure the three essential parameters: fuel level, the water level at the bottom of the tank, and the fuel temperature.

• Provides continuous monitoring of fuel, oil, or gas levels in horizontal tanks.
• Provides historical level data for analysis.
• Provides low or critical level alerts.
• Helps reconcile inventory and fuel supply.
• Provides online access 24 hours a day, 7 days a week from any Internet browser.

MECHANICAL CHARACTERISTICS:

Stainless Steel AISI303 Ø 50 mm enclosure IP 68 degree protection up to 10 m. water submersion max. 24h.

Tank connection: threaded or flanged.

Explosion proof construction, Exd brass nickel coated ½” NPT cable GLAND. 

Stainless steel pipe AISI 304 / 316 Ø 14.0 mm. N. 2 stainless steel AISI 316 / expanded NBR floats Ø 42 / 52 mm.

POWER REQUIREMENTS: 12 – 30 VDC.
RS485 serial port communication.

METROLOGICAL DATA:

Product Level / mm
Interface Level / mm (water presence detection)
Product average temperature up to max. 5 temp sensors.
Temperature accuracy in range -20 ÷ +50 °C: ± 0,2 °C

COMMUNICATION: GPRS / LAN / WIFI

• AR 18 ATEX 023 ex II 1/2G
• Ex ia/ Ex d IIB T6 Ga/Gb IP68
• FISCO FIELD DEVICE Tamb = -40 +70°C
• EC compliance